Phone: 833-775-7546
info@garageskins.com
For additional information please reach out to GarageSkins, Inc.'s customer service at 877-775-7546 or email customerservice@garageskins.com
1. GarageSkins systems utilize Rare Earth Magnets to attach to customer's garage door.
2. Garage doors must be metal or have a metal frame on the inside of the garage door for magnetism.
3. If you are unsure if your garage door has the ability for a magnet to attach, test your garage door by placing a refrigerator magnet to see if there is a magnetic connection.
Custom orders not available at this time. Website will be updated when custom GarageSkins systems are available.
1.) The sections on your garage door may vary in height, please check all sections. We can fabricate some combinations of size, but not all at this time. By submitting your measurements to us we will be able to let you know if your combination can be fabricated.
2.) The very top section of the garage door might have a portion that sits behind the frame of the garage door opening (when the garage door is closed). This will give the appearance that the top sections are not the same height as the other sections when it actually is. If more than 3 inches in behind the door framing, then your GarageSkins system would fall into the custom order category
Customer would need to have a garage door specialist repair their garage door before using GarageSkins.
1. The magnets of the GarageSkins system must attach to the flat surface of garage door.
2. If garage door has significant dents or bows in/out with 1 or more sections of the garage door, this will prevent the GarageSkins system from functioning appropriately and will not give the desired appearance.
3. Without a flat/flush surface the 6 magnets of a single GarageSkins system panel might not attach equally. The performance of GarageSkins system relies on all magnets of the panels being able to attach collectively.
3. Minor dents and dings would be all right.
Customer would need to remove all security locks, handles and decorative hardware off garage door to utilize GarageSkins
1. GarageSkins system must have a flat/flush surface and any handles or security locks will prevent the GarageSkins system from functioning correctly and will not give the desired appearance.
2. Customer would need to remove outside handles/security locks. This, however, could affect the functionality of their garage door. (Example: if customer can only secure their garage door with the security lock or can only open their door with an outside handle)
3. Accessories garage handles and décor for GarageSkins system are being developed. (GarageSkins system will have specifically placed magnets built into their panels where décor can attach). WEBSITE WILL BE UPDATED WHEN GARAGESKINS SYSTEM ACCESSORIES ARE AVAILABLE
Customer would need to remove window molding to utilize GarageSkins. HOWEVER, this could cause a functionality issue with the customer's garage door windows. Customer's garage door windows might not be able to stay in place without the window molding.
1. GarageSkins system must have flat/flush surface so all rare earth magnets on the GarageSkins system panel can connect to customer's garage door.
2. Windows on the customer's garage door that have molding (holding the windows in place) will cause an issue were the GarageSkins system panel magnets will not attach flush.
3. GarageSkins system should function correctly if there is no molding, protrusions or the window on the customer’s garage recesses.
4. Currently GarageSkins system systems do not have window sections built in, however these are in development and will be brought to market after our initial launch. If you currently have windows, you can install our system directly over the top, however this will cover the windows and block light from coming into your garage. For this to work your windows cannot have moldings on the outside that don’t allow the GarageSkins system to lay flush on your upper panel. Once available, our WindowSkins sections will have a removeable covering on the back of the window that, when removed, will allow light to come into the garage through your existing windows. Stay tuned for our GarageSkins system accessories!
Real wood veneers make all the difference. You can touch our GarageSkins system overlays, run your hand over them, and you’d swear it was solid, dimensional wood. Why? Because it is real wood. Even though it is only a fraction of a millimeter thick, it still looks and feels like a solid piece of lumber.
We select our veneers from a variety of species. This allows us to mimic almost any wood species out there while keeping the structural integrity of the wood.
Neodymium magnets (also called “rare-earth”) provide an amazing amount of force holding your GarageSkins system overlays solidly onto your metal garage door. They are even strong enough to reach through aluminum cladding and attach to the steel stretchers underneath. The result? Easy installation and permanent, dynamic adhesion.